Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 21

# Record card
44
Description

The technology for organic thin film transistors (OTFTs) is suitable for large area electronics, disposable electronics and "Internet of Things" applications. Circuits employing OTFTs can be realized by using very cheap printing technologies. The electrical behavior of these devices is essentially different from the behavior of silicon MOSFETs and, in order to enable circuit design, compact models specific for OTFTs are needed.

The presented technology is an electrical compact model for OTFTs that:

Thematic areas
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Internet of Things
# Record card
27
Description

The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Bio-medicals
Health & Biotech / Diagnostic kits
ICT & Electronics / Big Data
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Health & Biotech / Biosensors
# Record card
28
Description

The portable device is intended to assess exposure to electromagnetic fields produced by an MRI equipment. The device (dosimeter) allows to improve the analysis and study of the problems related to the exposure of the operators, starting from the technical-scientific aspects related to the exposure, also allowing to create a manual of best practices as well as to improve the professional training of operators.

Thematic areas
Health & Biotech / Bio-medicals
ICT & Electronics / Electronics and microelectronics
# Record card
53
Description

VisLab laboratory of IMM possesses a latest generation Raman micro-spectroscope equipped for vibrational measurements with high spatial and spectral resolution, at controlled temperature and in fast-imaging. The apparatus can be used to collect information and chemico-physical maps without the need for sample preparation and alteration, therefore for non-destructive studies and in operating conditions.

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Agrifood / Food quality & safety
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Organic substances
Chemicals & Physics / Man made fibres
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Atomic and molecular spectroscopy
Materials / Plastics, polymers
Chemicals & Physics / Imaging & image processing
Materials / Properties of materials, corrosion, degradation
Materials / Processes of production & treatment of materials
Materials / Photo-active & graphene-based materials
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Materials / Semiconductors and Superconductors
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Energy and environmental sustainability / Sensory
ICT & Electronics / Electronics and microelectronics
# Record card
72
Description

NIRS is a non-invasive technique for the human brain cortex imaging based on the measurement of the NIR light emitted by suitable optical sources placed on the patient head and backdiffused to the surface after passing through the brain tissues. NIRS monitors the percentage of oxygenated and reduced hemoglobin  in the blood, and it allows the real time functional imaging of the brain cortex also in tomographic mode (Diffuse Optical Tomography - DOT).

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Medical imaging & equipment
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
# Record card
68
Description

In the last years, genetics played a strategic role in the identification of therapeutic targets for complex diseases. Genetic studies identified thousands of variants contributing to disease onset and/or to the influence of measurable features (phenotypes) impacting health. The mechanism of action by which they modulate diseases and phenotypes is still unknown for the vast majority.

Thematic areas
Health & Biotech / Bio-informatics
ICT & Electronics / Big Data
# Record card
16
Description

Detection devices for the presence of molecules of interest (analytes) enjoyed a renewed burst with the introduction of biological components (biosensors). Their high specificity is often used in various fields, from environmental monitoring and biomedicine to the protection and promotion of agri-food products. However, the high cost of production and the lack of compatibility with mass sampling (high-throughput) sometimes limit their use.

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Smart Devices for Health and Wellness
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Health & Biotech / Biosensors
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Micro and nanotechnology related to biological sciences
Energy and environmental sustainability / Sensory
Health & Biotech / Diagnostic kits
# Record card
158
Description

Solid State Nuclear Magnetic Resonance spectroscopy (SSNMR) is today one of the most powerful techniques for characterizing solid and soft materials and systems. This spectroscopy allows the detailed characterization of structural and dynamic properties over large spatial (0.1-100 nm) and time (102-10-11 s) scales. Accessing these properties allows a deep knowledge of a material to be obtained and  its design and optimization to be oriented.

Thematic areas
ICT & Electronics
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Additive and advanced industrial manufacturing
Additive and advanced industrial manufacturing / Packaging
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Additive and advanced industrial manufacturing / Factory of the Future
Materials
Materials / Wood products
Health & Biotech
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Development of new drugs
Health & Biotech / Regenerative Medicine
Health & Biotech / Care, Hygiene, Cosmetics
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
Aerospace and Earth Science
Aerospace and Earth Science / Aeronautical technologies and avionics
Tourism, social sciences and cultural heritage / Multimedia technologies
Tourism, social sciences and cultural heritage / Archaeology
Agrifood
Agrifood / Agriculture
Agrifood / Food quality & safety
Automotive transport and logistics
Automotive transport and logistics / Vehicles
Automotive transport and logistics / Shipbuilding
Automotive transport and logistics / Innovative fuels
Chemicals & Physics
Energy and environmental sustainability
# Record card
94
Description

The metasurface optomechanical modulator is a device designed to modulate the amplitude, phase and polarization of a beam of electromagnetic radiation, independently, or simultaneously, according to prescribed paths in the parameter space (for example, as regards polarization, paths on the Poincaré sphere). The concept of our device can be applied to the entire spectrum of electromagnetic waves: from radio frequency, to microwaves (GHz), to millimeter waves (THz), to far and near infrared radiation, and to visible light.

Thematic areas
Chemicals & Physics / Imaging & image processing
ICT & Electronics / Laser technologies
ICT & Electronics / Optics & Acoustic
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Energy and environmental sustainability / Sensory
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Chemicals & Physics / Quantum optics
Materials / Optical materials
Chemicals & Physics / Atomic and molecular spectroscopy
ICT & Electronics / Telecommunications
# Record card
157
Description

The technology concerns planar optical antennas composed of thin metal films and dielectric materials for the efficient direction of the light emitted by light sources, such as fluorescent molecules and bio-markers. They consist of a reflector layer, adjacent to the substrate, and a director, semi-reflective, between which the emitter is positioned, integrated into a homogeneous dielectric layer.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Quantum optics
Chemicals & Physics / Radiometry, photometry and vision
Chemicals & Physics / Atomic and molecular spectroscopy
Agrifood
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Automotive transport and logistics
Health & Biotech
Health & Biotech / Biosensors
Health & Biotech / Diagnostic kits
Energy and environmental sustainability
Energy and environmental sustainability / Sensory
# Record card
77
Description

The platform allows the deployment of a sensor network with peripheral nodes spread on the crop fields or on the environment for the monitoring of crop parameters/environmental parameters. The network architecture integrated LoRa peripheral nodes for short-medium range communication and star-center NB-IoT based for long range communication. It includes a web server and MySQL database for data storage and visualization. The network architecture is scalable to adapt to the area to monitor.

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Agrifood / Agriculture
Agrifood / Forestry
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Internet of Things
ICT & Electronics / Information processing, information system, workflow management
# Record card
96
Description

The proposed technology deals with the development of active SERS (Surface Enhanced Raman Scattering) substrates ad hoc designed for diagnostics of cultural heritage. The substrates are prepared starting from common commercial 'polishing film' sheets (lapping optical fibers) showing an intrinsic roughness (48- 1000 nm) that favors the SERS effect. A pattern of silver or gold nanoparticles are deposited on these films through Pulsed Laser Deposition (PLD).

Thematic areas
Tourism, social sciences and cultural heritage / Education & learning
ICT & Electronics / Artificial Intelligence
ICT & Electronics / IT and Telematics applications
ICT & Electronics / Multimedia
Tourism, social sciences and cultural heritage / Socio-economic models
Tourism, social sciences and cultural heritage / Multimedia technologies
# Record card
184
Description

We developed an hybrid organic-inorganic composite consisting of a 2D perovskite and a copolymer. At room temperature the composite is highly transparent in the visible region with transmittance > 90%. At higher temperatures, the movement of the polymer chains releases the precursors, allowing the perovskite formation, which results in a colored film. The color changes according to the ‘n’ value of the PVK. PVK with n=1 starts coloring at 70°C, achieving a ∆Tmax = 91.5% at 510 nm.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Energy and environmental sustainability
Energy and environmental sustainability / Rational use of energy
Materials
Materials / Composite and hybrid materials
# Record card
175
Description

The invention is a synthetic method to prepare colloidal nanomaterials of V-VI-VII semiconductors that do not contain toxic elements. This is the first method for the synthesis of mixed anion nanomaterials without toxic elements at large, which permitted to obtain, among others, bismuth chalcohalide nanocrystals that are arguably considered as one of main candidates to be the next big thing for light energy conversion.

Thematic areas
Materials
Materials / Processes of production & treatment of materials
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Materials / Semiconductors and Superconductors
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Energy production, transmission and conversion
ICT & Electronics
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Colours & dyes
Materials / Composite and hybrid materials
Materials / Optical materials
# Record card
38
Description

The Q-PLL is a nonlinear circuit which can maintain a locked state when forced by two incommensurate frequencies.

The locked state is a third frequency parametrically selected among those prescribed by the theory of three-frequency resonances in dynamical systems.

In particular, the locked frequency forms a three-frequency resonance with the frequencies of the quasi- periodic input and is closely related to the pitch perception of complex sound in humans.

Thematic areas
Materials / Properties of materials, corrosion, degradation
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Robotics and control systems
Health & Biotech / Medical Device
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Information processing, information system, workflow management
ICT & Electronics / IT and Telematics applications
ICT & Electronics / Multimedia
ICT & Electronics / Telecommunications