Nowadays, to properly design and develop advanced materials capable to preserve for long times their performance under aggressive environments such as power generation plants, renewables, nuclear reactors and electronics of new generation, transport on ground and on space, aeronautics, catalysis, biomedical implants, the optimization of metallurgical processes involved is crucial.
Technologies
In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).
Displaying results 1 - 15 of 16
The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.
The portable device is intended to assess exposure to electromagnetic fields produced by an MRI equipment. The device (dosimeter) allows to improve the analysis and study of the problems related to the exposure of the operators, starting from the technical-scientific aspects related to the exposure, also allowing to create a manual of best practices as well as to improve the professional training of operators.
Detection devices for the presence of molecules of interest (analytes) enjoyed a renewed burst with the introduction of biological components (biosensors). Their high specificity is often used in various fields, from environmental monitoring and biomedicine to the protection and promotion of agri-food products. However, the high cost of production and the lack of compatibility with mass sampling (high-throughput) sometimes limit their use.
An innovative approach for the treatment of diabetic and venous ulcers, characterized by a difficult healing process and therefore at potential risk of infection and therefore of hospitalization and amputation of the limb, is represented by the local administration of "bioactive" factors through the use of synthetic and/or biological matrices that allow a gradual and controlled release in order to obtain a better and faster healing.
Recently, nanoparticles and nanovesicles have been investigated as potential approaches for the treatment of neurodegenerative diseases. In particular, in the Biotech sector an increasingly deeper penetration of new treatment models and biological drugs based on cellular, subcellular and vesicle therapies is expected. The patent is based on the production of Myelin-based nanoVesicles (MyVes) produced by microfluidics, starting from myelin extracted from brain tissue. These vesicles find two major fields of applications as potential drugs or as supplements/nutraceuticals.
The NanoMicroFab infrastructure, support companies operating in the field of micro and nanoelectronics through the supply of materials, development of processes, design, fabrication and characterization of materials and devices. NanoMicroFab makes use of existing CNR facilities of the Institute of Microelectronics and Microsystems, the Institute of Photonics and Nanotechnologies and the Institute for the Structure of Matter and provides: • a complete line of development of devices based on wide band gap semiconductors.
Severe asthma or chronic obstructive pulmonary disease (COPD) are nowadays associated with a poor response to corticosteroids which led to the use of high-dose with consequent improved onset of side effects. The use of nanotechnologies can represent an innovative approach for the effective treatment of both asthma and COPD. The development of new nano-formulations involving the use of nanomaterials and specifically tailored to be inhaled offers numerous advantages over conventional inhaled dosage forms.
NANOINCICLO is a technology based on the use of nanostructured cyclodextrins (CDs) for the targeted delivery of drugs such as anticancer drugs, photodynamic drugs, anti-inflammatories, antivirals, antibacterials, nutraceuticals and metals with therapeutic and diagnostic properties. Successful CDs for the proposed technology are FDA-approved or in advanced pre-clinical investigational stage and include natural and functionalized, polymeric, and amphiphilic monomeric CDs.
Combinations of several enzymes in a production chain are preferred to “first generation” enzymatic processes (where the "single reaction - single enzyme" principle was followed), for the synthesis of compounds with high added value starting from simple and cheap substrates. An important requirement for obtaining control in "cascade enzymatic reactions" is the ability to deliver from one biocatalyst to the next one the various intermediates, limiting as much as possible the diffusion of the latter in the solvent.
Filamentous bacteriophages for size, in vivo biodistribution and easiness of engineering, are considered as natural nanoparticles. The developed technology allows the construction of bio-nanoparticles based on filamentous bacteriophages delivering proteic antigens and immunomodulating lipids. Thanks to the high content of hydrophobic residues, phage capsid proteins have high binding affinity to lipids, allowing the conjugation of immunostimulating lipids.
The study of proteins is typically limited to notions, sometimes with the aid of virtual 3D models, obtained from visualization programs. A knowledge of this type, although useful, limits the ability to acquire a more direct knowledge, almost never leads to awareness of dimensions, and is particularly difficult for those who do not have a strong capacity for three-dimensional imagination.
Our team can develop low-cost ultra-flexible sensors integrated on plastic substrate for volatile organic compounds (VOCs) and gas detection. These devices combine scalable fabrication technologies, implementing active materials such as nanostructured metal oxides or stack of nanostructures decorated with metal nanoparticles, thus enabling a high sensitivity (in the range of hundreds of ppb). These devices can be applied to numerous industrial and commercial sectors and they can be embedded in systems that are more sophisticated.
Safe, efficient and specific nano-delivery systems are increasingly needed for precision and regenerative medicine and targeted therapies (e.g. anticancer and antimicrobial therapies), as well as for the cosmetic and nutraceutical sectors’ applications. Despite the appreciable success of synthetic nanovectors, like for example liposomes, their clinical and market application is hampered by some limitations: • large scale production, • low cost production • intrinsic toxicity • limited cellular uptake • limited consumer acceptance.
VOLIS is an online platform that contains various tests for assessing Italian Sign Language (LIS) comprehension skills in signing children, from 4 to 11 years of age. The consequences of some difficulties such as deafness, cognitive impairments and autism spectrum disorder may affect learning, social interaction and broad communicative skills. The use of LIS may support children that have difficulties in acquiring and using a using spoken languages.