Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 15

# Record card
161
Description

AIDD is an integrated tool and a radically new way to discovery new drugs for neurodegenerative diseases (Alzheimer’s, Epilepsy, Ageing, etc.).

Thematic areas
Health & Biotech
Health & Biotech / Bio-informatics
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Development of new drugs
Energy and environmental sustainability
Energy and environmental sustainability / Simulation
# Record card
80
Description

Time-correlated single photon counting (TCSPC) is regarded as the “gold-standard” method for fluorescence lifetime measurements. However, TCSPC requires using highly sensitive detectors, not suitable for measurements under bright light conditions, thereby making the use impractical in clinical settings. The invention described here solves this problem by synchronizing the fluorescence detection with an external light source.

Thematic areas
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Health & Biotech / Biosensors
Health & Biotech / Bio-medicals
Health & Biotech / Medical imaging & equipment
Health & Biotech / Diagnostic kits
Health & Biotech / Bio-informatics
# Record card
25
Description

The Biocrystal Facility, a large multidisciplinary laboratory established at the Institute of Molecular Biology and Pathology (IBPM) of CNR, in collaboration with the Biochemistry Department of Sapienza University aims at supporting the italian scientists and the pharmaceutical companies in the research to find new drug and vaccine against the endemic and epidemic diseases through structure-based drug design.

Thematic areas
Health & Biotech / Bio-informatics
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
61
Description

The compact-GC platform is a MEMS-based analytical module for the purge&trap pre-concentration and (gas)-chromatographic separation of a sample. The two analytical MEMS (pre-concentrator and GC column) are interconnected by means of a MEMS microfluidic manifold. The microfluidic manifold interconnects the analytical MEMS, but it also acts as injector through the integrated micro-valves.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Energy and environmental sustainability / Safety and security
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Materials / Processes of production & treatment of materials
Health & Biotech / Smart Devices for Health and Wellness
Agrifood / Food quality & safety
Energy and environmental sustainability / Energy production, transmission and conversion
Energy and environmental sustainability / Cleaner use of fossil fuels
Tourism, social sciences and cultural heritage / Safety and security
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Energy and environmental sustainability / Environmental engineering/technologies
Additive and advanced industrial manufacturing / Process control and logistic
Energy and environmental sustainability / Sensory
ICT & Electronics / Electronics and microelectronics
Chemicals & Physics / Separation technologies
# Record card
95
Description

The proposed technology is based on the micro-fabrication of electrodes in order to generate surface acoustic waves (SAW) with well-defined frequencies, on piezoelectric substrates. The operating principle of a surface acoustic wave sensor is linked to the variation of the characteristics of the acoustic wave that propagates on the device (e.g. wave velocity on the substrate, etc.) caused by the interaction with the environment (e.g. interaction of an analyte on the surface of the device, deformation of the substrate, etc.).

Thematic areas
Agrifood / Food quality & safety
Aerospace and Earth Science
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Energy and environmental sustainability / Sensory
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Electronics and microelectronics
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Biosensors
Tourism, social sciences and cultural heritage / Safety and security
# Record card
150
Description

The virtual dynamic docking, carried out in the MOLBD3 lab of the Institute of Biophysics, allows the identification of new drugs through the structural information deriving from the study of target proteins, responsible for some human pathologies. In particular, we screen drugs or small molecules (commercial/own libraries) against known protein sites, surface cavities, surfaces of protein-protein interactions (fixed/rigid hotspots) or structural transition states (dynamic hotspots).

Thematic areas
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Bio-medicals
Health & Biotech / Bio-informatics
# Record card
19
Description

We propose an optical technique for the fast check of the presence, on the exposed surfaces of persons and objects, of explosives and their precursors, or drugs, or in general materials which are not allowed in restricted environments: airports, courts, places of worship, etc. The technique yields bi-dimensional pictures, with exposure time of < 1 sec, reporting the target substances, and their locations and quantities. The technique already provided laboratory preliminary results, to be completed, and fully validated for sensitivity and selectivity.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
Chemicals & Physics / Imaging & image processing
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Chemicals & Physics / Atomic and molecular spectroscopy
# Record card
62
Description

We propose a portable chemical analysis system capable of identifying chemical substances at trace concentrations (sub-ppm), even in case of a complex matrix of interfering species.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Smart cities and Communities
ICT & Electronics / Robotics and control systems
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Additive and advanced industrial manufacturing / Process control and logistic
Chemicals & Physics / Separation technologies
Additive and advanced industrial manufacturing / Factory of the Future
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Energy and environmental sustainability / Safety and security
Health & Biotech / Medical Device
Energy and environmental sustainability / Natural disasters
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Sensory
Measurement tools and Standards
ICT & Electronics / Electronics and microelectronics
# Record card
68
Description

In the last years, genetics played a strategic role in the identification of therapeutic targets for complex diseases. Genetic studies identified thousands of variants contributing to disease onset and/or to the influence of measurable features (phenotypes) impacting health. The mechanism of action by which they modulate diseases and phenotypes is still unknown for the vast majority.

Thematic areas
Health & Biotech / Bio-informatics
ICT & Electronics / Big Data
# Record card
183
Description

This technology concerns the development of new eco-sustainable UV physical/mineral filters with the aim of offering important innovations per the cosmetic sector. This, encouraged by European initiatives in the Green-Deal context, is constantly looking for new components with improved protection of the human health and the environment.

Thematic areas
Materials
Materials / Ceramic materials
Materials / Composite and hybrid materials
Chemicals & Physics
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability
Tourism, social sciences and cultural heritage / Safety and security
Health & Biotech
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
129
Description

Lifeshell is an anti-seismic furniture construction concept, which can be used for making wardrobes, tables, desktops, beds. It’s made by timber based panels: highly resistant and flexible, relatively lightweight and inexpensive. Lifeshell benefits from the natural wood elasticity and from smart connections for dissipating the great impact energies occurring during an earthquake. Lifeshell has been designed for resisting partial building collapses, and to provide a safe shell where inhabitants can find refuge.

Thematic areas
Aerospace and Earth Science
Aerospace and Earth Science / Seismology
Materials
Materials / Wood products
Energy and environmental sustainability / Building materials
Agrifood
Agrifood / Forestry
Health & Biotech
Health & Biotech / Smart Devices for Health and Wellness
Energy and environmental sustainability
Tourism, social sciences and cultural heritage / Safety and security
Energy and environmental sustainability / Natural disasters
Energy and environmental sustainability / Simulation
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
Bioeconomy
# Record card
243
Description

This invention comprises an interrogation and readout differential method for chemical sensors based on Surface Plasmon Resonances (SPR). The integration of the SPR sensing unit (chip or other), as intermediate reflecting element of a Fabry-Perot (FP) optical resonator, is the starting point for the application of this method.

Thematic areas
ICT & Electronics
ICT & Electronics / Laser technologies
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
ICT & Electronics / Optics & Acoustic
Agrifood
Energy and environmental sustainability
Health & Biotech
Agrifood / Food quality & safety
Additive and advanced industrial manufacturing
Health & Biotech / Biosensors
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing / Factory of the Future
Measurement tools and Standards
Tourism, social sciences and cultural heritage
ICT & Electronics / Microwaves and RF
# Record card
139
Description

The study of proteins is typically limited to notions, sometimes with the aid of virtual 3D models, obtained from visualization programs. A knowledge of this type, although useful, limits the ability to acquire a more direct knowledge, almost never leads to awareness of dimensions, and is particularly difficult for those who do not have a strong capacity for three-dimensional imagination.

Thematic areas
Health & Biotech
Health & Biotech / Bio-informatics
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
Tourism, social sciences and cultural heritage / Education & learning
Tourism, social sciences and cultural heritage / Entertainment
Tourism, social sciences and cultural heritage / Socio-economic models
Tourism, social sciences and cultural heritage / Multimedia technologies
# Record card
141
Description

Thematic areas
Energy and environmental sustainability
Tourism, social sciences and cultural heritage / Safety and security
Energy and environmental sustainability / Sensory
Measurement tools and Standards
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Archaeology
Energy and environmental sustainability / Safety and security
# Record card
256
Description

Environmental monitoring is a rapidly growing field, both in academia and industry. The use of wearables for environmental monitoring is a promising technique, as it allows data to be collected continuously and comprehensively. The main problem with using wearables for environmental monitoring is the size and weight of the system, as well as the high degree of specialization required to develop a fully functional device.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Energy and environmental sustainability
Energy and environmental sustainability / Sensory
Energy and environmental sustainability / Wearable technologies
Health & Biotech
Health & Biotech / Smart Devices for Health and Wellness
ICT & Electronics / Internet of Things
Tourism, social sciences and cultural heritage / Safety and security