Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 31 - 45 of 94

# Record card
18
Description

The current technology allows to achieve new macroporous superadsorbent polymeric materials able to remove toxic contaminants from water and soil showing excellent sequestering properties against arsenate As (V), chromate Cr (VI) and Borate B (III) ions. The material is obtained by radical cryopolymerization of the monomer 4'-vinyl-benzyl-N-methyl-D-glucamine and / or its mixtures with hydroxyethyl-methacrylate (HEMA).

Thematic areas
Materials / Plastics, polymers
# Record card
86
Description

Anthocyanins are antioxidant polyphenolic pigments produced by plants that are widely used in the food, cosmetic and pharmaceutical industries. The technology allows to obtain in a short time potato cell lines in which the production of highly acetylated and highly complex anthocyanins is increased in addition to other antioxidant polyphenolic compounds. The obtained cellular lines have a high production efficiency, comparable to the extraction of berries, but with the advantage of having an on-demand production which is not limited to seasonality.

Thematic areas
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
250
Description

22q11.2DS(DGS) deletion syndrome is a rare and phenotypically variable multiorgan syndrome, currently without any cure. Our aim is to develop a standardized approach to formulate pharmacological products useful for clinical trials direct to prevent some serious clinical manifestations of adolescence and adulthood, such as neuropsychiatric and musculoskeletal diseases, or to eliminate or improve cardiovascular defects during embryonic development.

Thematic areas
Health & Biotech
# Record card
248
Description

The technology based on cell or tissue cultures is very useful for the production of bioactive compounds. These molecules, depending on the class they belong to, can be used in the food, pharmaceutical and cosmetic industry. In particular, the developed technology is addressed to the optimization of bioactive compounds in plant cell/tissue cultures having the biosynthetic pathway of the compound of interest.

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
# Record card
78
Description

INCIPIT technology allowed the implementation of a multifunctional, micro-structured and electroconductive therapeutic product to treat patients with myocardial infarction, the leading cause of death for cardiovascular disease.  Current therapies (drugs, bypass, angioplasty) do not restore the functionality of damaged myocardial tissue.

Thematic areas
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Health & Biotech / Medical Device
Health & Biotech / Regenerative Medicine
Materials / Plastics, polymers
# Record card
101
Description

The herein described technology aims at the development of a platform of injectable hydrogels for application as drug carriers for localized delivery or in the regenerative medicine field. The use of ad-hoc synthesized poly(ether urethane)s (PEUs) as hydrogel forming materials is a common property which characterizes all the systems belonging to this platform.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Medical Device
Health & Biotech / Regenerative Medicine
Materials / Processes of production & treatment of materials
Materials / Plastics, polymers
# Record card
7
Description

Uniform coverage with porous layers over extended surfaces is beneficial for many purposes. Depending on the nature/composition, thickness and interfaces of the layer, this kind of special coverage can assure pivotal properties such as transparency, bendability, high surface reactivity, intermixing capability. In the long list of desired porous materials, transparent oxides find application in the fields of Photovoltaics, Sensing, Photocatalysis, Water Purification and Splitting, Lithium Batteries and many more.

Thematic areas
Materials / Processes of production & treatment of materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Energy and environmental sustainability / Sensory
Energy and environmental sustainability / Renewable sources
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Energy production, transmission and conversion
Materials / Composite and hybrid materials
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Energy and environmental sustainability / Pollution treatment (air, soil, water)
# Record card
160
Description

At IFN-CNR, in collaboration with Politecnico di Milano-Department of Physics, we have developed Raman microscopy approaches compatible with the study and characterization of biological and industrial samples. In detail, our facility houses a self-built spontaneous confocal Raman microscope with the following characteristics: two excitation lasers (660nm and 785nm), inverted microscope (Olympus IX-73) and Princeton spectrometer / CCD.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Imaging & image processing
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
# Record card
246
Description

Large-scale synthesis of inorganic colloidal TiO2@WO3-x nanoheterostructures based on multicomponent semiconductor (TiO2)-plasmonic (WO3-x) heterojunctions.

Thematic areas
Materials
Materials / Photo-active & graphene-based materials
Chemicals & Physics
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability
Energy and environmental sustainability / Pollution treatment (air, soil, water)
# Record card
56
Description

Mirrors for space applications, besides featuring suitable optical properties, should be light, resistant to mechanical stresses, and unsensitive to light-shadow thermal cycling. The standard optical materials easily fulfill optical and thermal requirements, but are fragile, and the mirrors must be thick (typically 1/6 of the diameter). For this reason they are heavy, and the only available solution is to lighten them, by removing material from the back side, still preserving the necessary mechanical robustness and optical quality.

Thematic areas
Aerospace and Earth Science / Aeronautical technologies and avionics
Aerospace and Earth Science / Satellite technologies
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Materials / Composite and hybrid materials
Materials / Optical materials
# Record card
252
Description

Extracellular vesicles produced by teratocarcinoma cells were isolated and characterized. Functional assays on glioblastoma (GBM) cell cultures showed the inhibitory effect of these vesicles on tumor cell migration, without inducing undesirable effects such as increased cell proliferation or chemotherapy resistance.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
60
Description

We propose a compact innovative spectroscopy system operating in the UV range. In the actual version, designed for gas, it exhibits: an aluminium tubular optical chamber (length can be adjusted; currently is 20 cm); a cheap commercial UV LED; a SiC visible blind UV detector designed and manufactured at the CNR-IMM facilities. The team developed also the electronic chain for wireless remote real time read out; while able to deal with pA current levels, it uses very cheap components and construction technology.

Thematic areas
Energy and environmental sustainability / Environmental engineering/technologies
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Energy and environmental sustainability / Sensory
Agrifood / Agriculture
ICT & Electronics / Internet of Things
Agrifood / Food quality & safety
Energy and environmental sustainability / Pollution treatment (air, soil, water)
# Record card
29
Description

The aim of the research group is the creation of 3D models (microorgan/ organoids) constructed using samples obtained from patients, both biopsy samples and samples collected with non-invasive techniques (exhaled breath condensate, induced sputum, blood samples).

Thematic areas
Health & Biotech / New therapies
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Medical Device
# Record card
238
Description

Mergers e Acquisitions represent important forms of business deals because of the volumes involved in the transactions and the role of the innovation activity of companies. By considering the patent activity of about one thousand companies, we develop a method to predict future acquisitions by assuming that companies deal more frequently with technologically related ones.

Thematic areas
ICT & Electronics
ICT & Electronics / Information processing, information system, workflow management
Tourism, social sciences and cultural heritage / Socio-economic models