Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 14 of 14

# Record card
239
Description

Bivalve mollusc shells are made mainly of CaCO3 (ca 95%), with a small fraction of organic material. If from these shells this mineral is retrieved, they could become a renewable and sustainable “mine” of a “blue” CaCO3. Bivalve mollusc shells, also after the removal of the animal flesh, maintain a certain quantity of organic substances, part in the muscle and part in the shell.

Thematic areas
Bioeconomy
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Health & Biotech
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Waste management
Additive and advanced industrial manufacturing
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Chemicals & Physics
Chemicals & Physics / Inorganic substances
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Materials
Materials / Ceramic materials
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Paper technology
Materials / Plastics, polymers
# Record card
171
Description

B-ME developed the first thermoplastic composite electrode film based on bio-derived and biodegradable polyesters and carbon nano-fibers. It is metal-free, highly electrically conductive and possess good thermo-mechanical properties, a challenging combination of three features in a single product. This is the first-of-its-kind product, as, to the best of our knowledge, no thermoplastic biobased electrode film has been effectively produced and used so far.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Internet of Things
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Bioeconomy
Materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Materials / Composite and hybrid materials
Materials / Plastics, polymers
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Special chemicals
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Energy storage and transport
Energy and environmental sustainability / Energy production, transmission and conversion
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Wearable technologies
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
# Record card
89
Description

Nowadays, to properly design and develop advanced materials capable to preserve for long times their performance under aggressive environments such as power generation plants, renewables, nuclear reactors and electronics of new generation, transport on ground and on space, aeronautics, catalysis, biomedical implants, the optimization of metallurgical processes involved is crucial.

Thematic areas
Aerospace and Earth Science / Space sciences
Aerospace and Earth Science / Aeronautical technologies and avionics
Aerospace and Earth Science / Satellite technologies
Automotive transport and logistics / Vehicles
Automotive transport and logistics / Shipbuilding
Automotive transport and logistics / Propulsion
Automotive transport and logistics / Transport infrastructures
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Additive and advanced industrial manufacturing / Vacuum/High vacuum technologies
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Man made fibres
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Building materials
Materials / Ceramic materials
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Properties of materials, corrosion, degradation
Materials / Semiconductors and Superconductors
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Rational use of energy
Energy and environmental sustainability / Nuclear fission/nuclear fusion
Energy and environmental sustainability / Cleaner use of fossil fuels
Energy and environmental sustainability / Nuclear engineering
Energy and environmental sustainability / Safety and security
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Building materials
Health & Biotech / Bio-medicals
# Record card
26
Description

The final technology will add polarimetric capability to imaging cameras in the NUV/optical, providing simultaneous measurements of the different polarization states of the light. This will be obtained by the development of an innovative coating based on nanostructured emissive materials sensitive to the polarization of the incident light. A  double layer film of two organic systems will be coupled to image detectors so that the two polarization components of the incoming light are converted into two different colors.

Thematic areas
Aerospace and Earth Science / Satellite technologies
Materials / Optical materials
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
250
Description

22q11.2DS(DGS) deletion syndrome is a rare and phenotypically variable multiorgan syndrome, currently without any cure. Our aim is to develop a standardized approach to formulate pharmacological products useful for clinical trials direct to prevent some serious clinical manifestations of adolescence and adulthood, such as neuropsychiatric and musculoskeletal diseases, or to eliminate or improve cardiovascular defects during embryonic development.

Thematic areas
Health & Biotech
# Record card
160
Description

At IFN-CNR, in collaboration with Politecnico di Milano-Department of Physics, we have developed Raman microscopy approaches compatible with the study and characterization of biological and industrial samples. In detail, our facility houses a self-built spontaneous confocal Raman microscope with the following characteristics: two excitation lasers (660nm and 785nm), inverted microscope (Olympus IX-73) and Princeton spectrometer / CCD.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Imaging & image processing
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
# Record card
252
Description

Extracellular vesicles produced by teratocarcinoma cells were isolated and characterized. Functional assays on glioblastoma (GBM) cell cultures showed the inhibitory effect of these vesicles on tumor cell migration, without inducing undesirable effects such as increased cell proliferation or chemotherapy resistance.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
29
Description

The aim of the research group is the creation of 3D models (microorgan/ organoids) constructed using samples obtained from patients, both biopsy samples and samples collected with non-invasive techniques (exhaled breath condensate, induced sputum, blood samples).

Thematic areas
Health & Biotech / New therapies
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Medical Device
# Record card
74
Description

The object of the technology is the development of a transferable methodology from the laboratory scale to the pilot scale to be validated in the industrial setting for the treatment of basic waste of natural polymers of agro-food or manufacturing industry.

Thematic areas
Materials / Properties of materials, corrosion, degradation
Additive and advanced industrial manufacturing / Packaging
Energy and environmental sustainability / Renewable sources
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability / Waste management
Bioeconomy
# Record card
132
Description

The systems simulate, with high reproducibility, the conditions that occur in the different compartments of the gastrointestinal tracts and are promising to accurately mimic the digestive process, with the possibility to evaluate bioaccessibility and bioavailability. Moreover, the systems permit to study the synergic and reciprocal effects between the bioactive compounds characteristic of food and intestinal microbiota.

Thematic areas
Agrifood
Health & Biotech
Agrifood / Nutrition & health
Agrifood / Food quality & safety
# Record card
174
Description

Plants can compete favorably with traditional expression systems (mammalian cells, yeasts or bacteria) to produce recombinant proteins/peptides of pharmaceutical/industrial/agrifood interest. This technology names “Plant Molecular Farming”. The CNR-IBBA research team offers the study of new strategies for the expression and optimization of recombinant proteins/peptides in plant-based systems (plant tissues, transgenic plants, plant cell culture). Our pipeline is based on the following modules:

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Regenerative Medicine
# Record card
21
Description

Our treatment demonstrated the ability to kill metastatic human melanoma cells, for which there are very few effective therapeutic approaches. Use of a specific Essential Oil (EO) to inhibit the replication of human metastatic melanoma cells. This EO can be used both for direct application to the skin, and administered by mouth to reach both primary and metastatic melanomas.

Thematic areas
Agrifood / Nutrition & health
Health & Biotech / Regenerative Medicine
Health & Biotech / New therapies
# Record card
93
Description

Safe, efficient and specific nano-delivery systems are increasingly needed for precision and regenerative medicine and targeted therapies (e.g. anticancer and antimicrobial therapies), as well as for  the cosmetic and nutraceutical sectors’ applications. Despite the appreciable success of synthetic nanovectors, like for example liposomes, their clinical and market application is hampered by some limitations: • large scale production, • low cost production • intrinsic toxicity • limited cellular uptake • limited consumer acceptance.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Materials / Processes of production & treatment of materials
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Agrifood / Marine resources
Agrifood / Nutrition & health
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
Chemicals & Physics / Subtainable substances and green chemistry
Health & Biotech / Regenerative Medicine