Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 25

# Record card
171
Description

B-ME developed the first thermoplastic composite electrode film based on bio-derived and biodegradable polyesters and carbon nano-fibers. It is metal-free, highly electrically conductive and possess good thermo-mechanical properties, a challenging combination of three features in a single product. This is the first-of-its-kind product, as, to the best of our knowledge, no thermoplastic biobased electrode film has been effectively produced and used so far.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Internet of Things
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Bioeconomy
Materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Materials / Composite and hybrid materials
Materials / Plastics, polymers
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Special chemicals
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Energy storage and transport
Energy and environmental sustainability / Energy production, transmission and conversion
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Wearable technologies
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
# Record card
27
Description

The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Bio-medicals
Health & Biotech / Diagnostic kits
ICT & Electronics / Big Data
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Health & Biotech / Biosensors
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
19
Description

We propose an optical technique for the fast check of the presence, on the exposed surfaces of persons and objects, of explosives and their precursors, or drugs, or in general materials which are not allowed in restricted environments: airports, courts, places of worship, etc. The technique yields bi-dimensional pictures, with exposure time of < 1 sec, reporting the target substances, and their locations and quantities. The technique already provided laboratory preliminary results, to be completed, and fully validated for sensitivity and selectivity.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
Chemicals & Physics / Imaging & image processing
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Chemicals & Physics / Atomic and molecular spectroscopy
# Record card
55
Description

The constant demand for more powerful and energy-efficient electronic devices than existing ones is challenging scientists and companies to develop innovative solutions that can address such primary technological needs. Based on a recent scientific discovery made by our team we have developed a technology for superfast and extremely scalable logic and computing circuits with minimal energy losses, which has the potential to become the leading technology in the future world of largescale computing and telecommunication infrastructures.

Thematic areas
ICT & Electronics / Cybersecurity
ICT & Electronics / Network technology, network security
ICT & Electronics / Future Internet
ICT & Electronics / Big Data
ICT & Electronics / Artificial Intelligence
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / IT and Telematics applications
ICT & Electronics / Microwaves and RF
ICT & Electronics / Telecommunications
Aerospace and Earth Science / Satellite technologies
# Record card
86
Description

Anthocyanins are antioxidant polyphenolic pigments produced by plants that are widely used in the food, cosmetic and pharmaceutical industries. The technology allows to obtain in a short time potato cell lines in which the production of highly acetylated and highly complex anthocyanins is increased in addition to other antioxidant polyphenolic compounds. The obtained cellular lines have a high production efficiency, comparable to the extraction of berries, but with the advantage of having an on-demand production which is not limited to seasonality.

Thematic areas
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
7
Description

Uniform coverage with porous layers over extended surfaces is beneficial for many purposes. Depending on the nature/composition, thickness and interfaces of the layer, this kind of special coverage can assure pivotal properties such as transparency, bendability, high surface reactivity, intermixing capability. In the long list of desired porous materials, transparent oxides find application in the fields of Photovoltaics, Sensing, Photocatalysis, Water Purification and Splitting, Lithium Batteries and many more.

Thematic areas
Materials / Processes of production & treatment of materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Energy and environmental sustainability / Sensory
Energy and environmental sustainability / Renewable sources
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Energy production, transmission and conversion
Materials / Composite and hybrid materials
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
Energy and environmental sustainability / Pollution treatment (air, soil, water)
# Record card
135
Description

Portable robotic device for bilateral neuromotor rehabilitation. An appropriate mechanical structure and a series of interchangeable accessories suitably designed allow the execution of various motor gestures of the upper limbs, involving different articulations and muscles. The possibility of being used with both limbs contributes to the recovery of motor coordination and facilitates the mechanism of brain plasticity. Some rotary axes the device is equipped with are motorized and sensorized.

Thematic areas
Health & Biotech
Health & Biotech / Bio-medicals
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Medical Device
ICT & Electronics
ICT & Electronics / Robotics and control systems
ICT & Electronics / Artificial Intelligence
# Record card
71
Description

Recently, nanoparticles and nanovesicles have been investigated as potential approaches for the treatment of neurodegenerative diseases. In particular, in the Biotech sector an increasingly deeper penetration of new treatment models and biological drugs based on cellular, subcellular and vesicle therapies is expected. The patent is based on the production of Myelin-based nanoVesicles (MyVes) produced by microfluidics, starting from myelin extracted from brain tissue. These vesicles find two major fields of applications as potential drugs or as supplements/nutraceuticals.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
Agrifood / Nutrition & health
# Record card
35
Description

We have identified compounds that show a neuroprotective action in vivo, in models of neurodegenerative diseases (e.g. SMA, Parkinson, Alzheimer, Huntington) in the model organism C. elegans. These compounds consist of: mixtures of 22 natural extracts, 15 natural molecules and 11 synthetic molecules.

Thematic areas
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
132
Description

The systems simulate, with high reproducibility, the conditions that occur in the different compartments of the gastrointestinal tracts and are promising to accurately mimic the digestive process, with the possibility to evaluate bioaccessibility and bioavailability. Moreover, the systems permit to study the synergic and reciprocal effects between the bioactive compounds characteristic of food and intestinal microbiota.

Thematic areas
Agrifood
Health & Biotech
Agrifood / Nutrition & health
Agrifood / Food quality & safety
# Record card
24
Description

Combinations of several enzymes in a production chain are preferred to “first generation” enzymatic processes (where the "single reaction - single enzyme" principle was followed), for the synthesis of compounds with high added value starting from simple and cheap substrates. An important requirement for obtaining control in "cascade enzymatic reactions" is the ability to deliver from one biocatalyst to the next one the various intermediates, limiting as much as possible the diffusion of the latter in the solvent.

Thematic areas
Materials / Processes of production & treatment of materials
Agrifood / Agriculture
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Micro and nanotechnology related to biological sciences
Chemicals & Physics / Agro chemicals
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Organic substances
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Plastics, polymers
# Record card
157
Description

The technology concerns planar optical antennas composed of thin metal films and dielectric materials for the efficient direction of the light emitted by light sources, such as fluorescent molecules and bio-markers. They consist of a reflector layer, adjacent to the substrate, and a director, semi-reflective, between which the emitter is positioned, integrated into a homogeneous dielectric layer.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Quantum optics
Chemicals & Physics / Radiometry, photometry and vision
Chemicals & Physics / Atomic and molecular spectroscopy
Agrifood
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Automotive transport and logistics
Health & Biotech
Health & Biotech / Biosensors
Health & Biotech / Diagnostic kits
Energy and environmental sustainability
Energy and environmental sustainability / Sensory
# Record card
174
Description

Plants can compete favorably with traditional expression systems (mammalian cells, yeasts or bacteria) to produce recombinant proteins/peptides of pharmaceutical/industrial/agrifood interest. This technology names “Plant Molecular Farming”. The CNR-IBBA research team offers the study of new strategies for the expression and optimization of recombinant proteins/peptides in plant-based systems (plant tissues, transgenic plants, plant cell culture). Our pipeline is based on the following modules:

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Regenerative Medicine
# Record card
76
Description

The platform allows acquisition of data from commercial and custom sensors. By now, the system has been embedded in a wearable wristband where elastomeric based strain gauge have been integrated to detect fine hand/wrist/arm movements. The platform integrates inertial sensors (accelerometers, gyroscopes) to acquire more details about the subject movements. A sensor-fusion algorithm enables advanced movement recognition (gesture, 3D orientation). A machine-learning algorithm is in development to increase the performance of the platform.

Thematic areas
Health & Biotech / Smart Devices for Health and Wellness
ICT & Electronics / Internet of Things
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Information processing, information system, workflow management