Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 31 - 43 of 43

# Record card
24
Description

Combinations of several enzymes in a production chain are preferred to “first generation” enzymatic processes (where the "single reaction - single enzyme" principle was followed), for the synthesis of compounds with high added value starting from simple and cheap substrates. An important requirement for obtaining control in "cascade enzymatic reactions" is the ability to deliver from one biocatalyst to the next one the various intermediates, limiting as much as possible the diffusion of the latter in the solvent.

Thematic areas
Materials / Processes of production & treatment of materials
Agrifood / Agriculture
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Micro and nanotechnology related to biological sciences
Chemicals & Physics / Agro chemicals
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Organic substances
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Plastics, polymers
# Record card
136
Description

The  invention relates to the water purification sector; it refers to a phytodepuration module and to a plant including this module. The objective is decontamination and recovery of drinking water from contaminated springs and wells, thermal, rainwater, wastewater and industrial wastewater. Phytodepuration tanks are known which use ferns to decontaminate water, but have the limits of requiring large surfaces and / or long treatment times.

Thematic areas
Energy and environmental sustainability
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Environmental engineering/technologies
Bioeconomy
# Record card
140
Description

The technology refers to an innovative plasma (ionized gas) source operating at atmospheric pressure and low electric power levels. A cold plasma is produced, characterized by an ion temperature significantly lower than the electron temperature. Partial ionization of a Helium flux is induced by a time-varying electric field in between two parallel grids, both perpendicular to the flux itself.

Thematic areas
Health & Biotech
Health & Biotech / Bio-medicals
Health & Biotech / Care, Hygiene, Cosmetics
Health & Biotech / New therapies
Health & Biotech / Medical Device
Chemicals & Physics
Chemicals & Physics / Cold Plasmas
# Record card
40
Description

Recently, it has been demonstrated that Raman spectroscopy can play a fundamental role in assisting the work of the anatomopathologist by allowing classification of oncological samples with practically 100% accuracy in oncological diagnosis.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Artificial Intelligence
# Record card
153
Description

To the enterprises working in the field of nutrition/nutraceutics and drug development/repositioning, we offer the know-how and state-of-the-art instrumentation of our labs to monitor multiple relevant biological parameters at the cellular level: metabolic activity, vitality, health, but also stress and toxicity. The use of advanced imaging techniques based on fluorescent/bioluminescent probes together with the availability of time-lapse acquisitions, guarantee the cutting-edge analysis of different biological parameters over time.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Development of new drugs
Health & Biotech / Biosensors
Agrifood
Agrifood / Nutrition & health
Agrifood / Food quality & safety
# Record card
152
Description

The proposed system is based on a high-resolution electrocardiograph in which the electrodes are positioned on maternal abdomen. The acquired signals are processed using a completely unsupervised software for fetal ECG extraction based on independent component analysis, maternal ECG canceling and a quality index optimization. The electrocardiograph is constituted by a light-weight and light-dimension portable unit, which acquires the signals and transmit them to a computer where the analysis software runs.

Thematic areas
Health & Biotech
Health & Biotech / Bio-medicals
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
# Record card
85
Description

This technology is based on an algorithm able to provide the probability of being asthmatic with high accuracy. This probability is based on the evaluation of respiratory function and, specifically, of forced expiratory vital capacity in the first second (FEV1), in resting conditions, and 20 minutes after administration of a bronchodilator drug.

Thematic areas
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
ICT & Electronics / IT and Telematics applications
Health & Biotech / Medical Device
# Record card
8
Description

Polymer development is approaching to a new stage of advancement in which new functionalities especially in combination with conductive polymers and nanomaterials are more effective. In this context the study of new composites is the key to enable the development of disruptive technologies as additive manufacturing. Increasing electrical conductivity open the way to a new class of objects to be prototyped rapidly at low cost with a high level of customization.

Thematic areas
ICT & Electronics / Laser technologies
Bioeconomy
Materials / Photo-active & graphene-based materials
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Additive and advanced industrial manufacturing / Factory of the Future
Health & Biotech / Biosensors
# Record card
128
Description

The proposed technology is about the development of an innovative sunscreen obtained from cod fish bones, according to the principles of the circular economy. The sunscreen is a reddish powder, which is constituted of hydroxyapatite (a calcium phosphate main component of human bones) modified with iron. It is prepared with a simple and easily scalable process (treatment of the bones in Fe solution and successively at T = 700 oC) and could be adapted for bones of other fishes. 

Thematic areas
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Materials
Materials / Ceramic materials
Health & Biotech
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
162
Description

Grape pomace, a by-product of wine-making, is rich in polyphenols, metals, organic acids and can become a functional ingredient in food and beverage. The stabilisation of the pomace has been optimised to preserve the anti-inflammatory and antioxidant properties of the molecules present. Isolated grape skins have been reused in purity or in blends with other plant components as a base for: 1) herbal teas, 2) ready-to-drink functional beverages, 3) freeze-dried products.

Thematic areas
Agrifood
Agrifood / Nutrition & health
Bioeconomy
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
# Record card
241
Description

Electrochromism is an optoelectronic characteristic of particular interest because it can be exploited in the creation of technologies such as smart windows (Smart Windows) to promote energy efficiency, automotive, sensor or visualization devices. Electrochromic materials change their optoelectronic characteristics, showing different colors depending on the applied electric field.

Thematic areas
Materials
Materials / Semiconductors and Superconductors
Energy and environmental sustainability
Energy and environmental sustainability / Rational use of energy
Health & Biotech
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Automotive transport and logistics
Automotive transport and logistics / Vehicles
Chemicals & Physics
Energy and environmental sustainability / Sensory
Chemicals & Physics / Organic substances
Chemicals & Physics / Colours & dyes
ICT & Electronics / Electronics and microelectronics
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Optical materials
Chemicals & Physics / Atomic and molecular spectroscopy
ICT & Electronics
# Record card
138
Description

We present a technology for the multiscale isolation (analytical-laboratory-production) of Extracellular Vesicles (VE), which overcomes the limitations of the currently available methods. As opposed to traditional "affinity-based" systems that exploit antibodies, our technology represents a radical paradigm shift in the development of affinity probes for vesicles, i.e.

Thematic areas
Health & Biotech
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Regenerative Medicine
Health & Biotech / Care, Hygiene, Cosmetics
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / Diagnostic kits
Chemicals & Physics
Chemicals & Physics / Separation technologies
# Record card
30
Description

X-ray imaging techniques can work in i) "full-field mode" in which the object to study (or part of it) is completely illuminated by the X-ray beam; ii) "scanning mode" in which an X-ray beam, focused through an opportune optics, illuminates in succession contiguous areas of the sample under examination, and the transmitted wave is measured by a detector placed at a proper distance from it. One of these X-ray scanning microscopes is available at the facility (X-ray MicroImaging, XMIL@b) of the Institute of Crystallography (CNR-Bari).

Thematic areas
Chemicals & Physics / Man made fibres
Additive and advanced industrial manufacturing / Packaging
Materials
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging