Quartz tuning forks are employed in scanning atomic force microscopy (AFM), as well as in some derived techniques, as high sensitivity detectors of interactions, of both conservative and dissipative kind, between the AFM nanometric probe and the investigated surface. However, the contributions of the two kinds of interaction result as convoluted in the sensor response, preventing fully quantitative measurements of the quantities of interest.
Technologies
In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).
Displaying results 31 - 45 of 50
The technology refers to an innovative plasma (ionized gas) source operating at atmospheric pressure and low electric power levels. A cold plasma is produced, characterized by an ion temperature significantly lower than the electron temperature. Partial ionization of a Helium flux is induced by a time-varying electric field in between two parallel grids, both perpendicular to the flux itself.
The platform allows the deployment of a sensor network with peripheral nodes spread on the crop fields or on the environment for the monitoring of crop parameters/environmental parameters. The network architecture integrated LoRa peripheral nodes for short-medium range communication and star-center NB-IoT based for long range communication. It includes a web server and MySQL database for data storage and visualization. The network architecture is scalable to adapt to the area to monitor.
The platform allows acquisition of data from commercial and custom sensors. By now, the system has been embedded in a wearable wristband where elastomeric based strain gauge have been integrated to detect fine hand/wrist/arm movements. The platform integrates inertial sensors (accelerometers, gyroscopes) to acquire more details about the subject movements. A sensor-fusion algorithm enables advanced movement recognition (gesture, 3D orientation). A machine-learning algorithm is in development to increase the performance of the platform.
The prototype uses soil moisture sensors which, through a measurement of dielectric permittivity, estimate the soil moisture based on which irrigation is started through relay-controlled solenoid valve. The system was developed using Open Source technologies. Specifically, for the hardware components, a small sized board computer Raspberry PI 3B + was used together with a 4G LTE Wi-Fi router and a Modbus rs485 / USB converter.
The proposed system is based on a high-resolution electrocardiograph in which the electrodes are positioned on maternal abdomen. The acquired signals are processed using a completely unsupervised software for fetal ECG extraction based on independent component analysis, maternal ECG canceling and a quality index optimization. The electrocardiograph is constituted by a light-weight and light-dimension portable unit, which acquires the signals and transmit them to a computer where the analysis software runs.
The present technology deals with jewels based on shape memory alloys and fabricated through additive manufacturing. In ICMATE-Lecco laboratories, several NiTi-based rings have been fabricated through a powder bed fusion technology (selective laser melting technique).
Network structures that require the use of a common database are affected by the risk of processing identification data that are necessary for sharing information and updating and processing data with equal access level between the network nodes. However, this sharing could lead risks of vulnerability when identification data are exchanged between the nodes of the network. The proposed information system involves the exchange of information by encrypting the identification data with an MD5 Hashing procedure (RFC1321).
The proposing team that works at CNR ISTEC has recently patented a technology for the production of the Smart Polycrystals (SP), i.e. transparent YAG-based ceramic polycrystals (Y3Al5O12) variably doped with rare earths ions and transition metals ions. The SPs solve the problem of the reduction of the efficiency in the solid state laser systems caused by the inhomogeneous heating of the single crystals during the emission process.
The study of proteins is typically limited to notions, sometimes with the aid of virtual 3D models, obtained from visualization programs. A knowledge of this type, although useful, limits the ability to acquire a more direct knowledge, almost never leads to awareness of dimensions, and is particularly difficult for those who do not have a strong capacity for three-dimensional imagination.
The proposed technology is about the development of an innovative sunscreen obtained from cod fish bones, according to the principles of the circular economy. The sunscreen is a reddish powder, which is constituted of hydroxyapatite (a calcium phosphate main component of human bones) modified with iron. It is prepared with a simple and easily scalable process (treatment of the bones in Fe solution and successively at T = 700 oC) and could be adapted for bones of other fishes.
The technology refers to a system for the safety and control of the mobility of vehicles, pedestrians, and mass transport users, in conventional and advanced contexts and is suitable for use as an infrastructure for the production/sharing of information and data, aimed at monitoring and intervention in critical areas by offering specific functions concerning the detection of potentially dangerous situations or the optimization of resources.
The invention concerns an apparatus for measuring the three-dimensional (3-D) sea surface elevation from moving and floating platforms. In particular, the invention consists of two or more synchronized digital video-cameras that frame, from distinct and remote points of view, a common portion of the sea surface. A triangulation process makes it possible to obtain a three-dimensional reconstruction of the sea surface from these images. The invention is particularly suitable for measuring sea waves.
We present a new concept of ultra-compact, configurable and implantable brain computer interface (BCI). The device can be applied to monitor or stimulate, with high temporal and spatial accuracy, neural activity of the brain. It allows implementation of closed-loop algorithms in real time applications. The system can be also used in vitro to monitor or induce cell growth or as tDCS tool. The system can be customized (microelectrodes materials and shapes) to guarantee the best solution for the specific application.