Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 48

# Record card
44
Description

The technology for organic thin film transistors (OTFTs) is suitable for large area electronics, disposable electronics and "Internet of Things" applications. Circuits employing OTFTs can be realized by using very cheap printing technologies. The electrical behavior of these devices is essentially different from the behavior of silicon MOSFETs and, in order to enable circuit design, compact models specific for OTFTs are needed.

The presented technology is an electrical compact model for OTFTs that:

Thematic areas
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Internet of Things
# Record card
161
Description

AIDD is an integrated tool and a radically new way to discovery new drugs for neurodegenerative diseases (Alzheimer’s, Epilepsy, Ageing, etc.).

Thematic areas
Health & Biotech
Health & Biotech / Bio-informatics
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Development of new drugs
Energy and environmental sustainability
Energy and environmental sustainability / Simulation
# Record card
171
Description

B-ME developed the first thermoplastic composite electrode film based on bio-derived and biodegradable polyesters and carbon nano-fibers. It is metal-free, highly electrically conductive and possess good thermo-mechanical properties, a challenging combination of three features in a single product. This is the first-of-its-kind product, as, to the best of our knowledge, no thermoplastic biobased electrode film has been effectively produced and used so far.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Internet of Things
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Bioeconomy
Materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Materials / Composite and hybrid materials
Materials / Plastics, polymers
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Special chemicals
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Energy storage and transport
Energy and environmental sustainability / Energy production, transmission and conversion
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Wearable technologies
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
# Record card
25
Description

The Biocrystal Facility, a large multidisciplinary laboratory established at the Institute of Molecular Biology and Pathology (IBPM) of CNR, in collaboration with the Biochemistry Department of Sapienza University aims at supporting the italian scientists and the pharmaceutical companies in the research to find new drug and vaccine against the endemic and epidemic diseases through structure-based drug design.

Thematic areas
Health & Biotech / Bio-informatics
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
75
Description

A virtuous multi-step biorefinery platform to convert urban biowaste into valuable molecules, not disregarding renewable energy and digestate production. The strategy is based on the integration of a thermal pretreatment capable of significantly increasing the fraction of fermentable organic carbon, in order to furthermore change the status of the feedstock to become more suitable for production of a) high-value bio-based molecules, b) biomethane and c) hygienized digestate to be recycled as biofertilizer.

Thematic areas
Energy and environmental sustainability / Environmental engineering/technologies
Bioeconomy
Energy and environmental sustainability / Renewable sources
Chemicals & Physics / Organic substances
Energy and environmental sustainability / Energy production, transmission and conversion
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability / Waste management
# Record card
48
Description

CPIAbot is a conversational assistant supporting the learning of Italian L2 for migrants. It has been tested in particular in the context of CPIA - Centri Provinciali per l'Istruzione degli Adulti - MIUR.

Thematic areas
Tourism, social sciences and cultural heritage / Education & learning
ICT & Electronics / Artificial Intelligence
ICT & Electronics / IT and Telematics applications
ICT & Electronics / Multimedia
Tourism, social sciences and cultural heritage / Socio-economic models
Tourism, social sciences and cultural heritage / Multimedia technologies
# Record card
31
Description

The assessment of bio-humoral markers beyond clinical evaluation would allow a more comprehensive pheno/endotyping of patients affected by chronic inflammatory diseases. Therapy personalization would require a profile of the mediators that are relevant in the disease pathogenesis and that well correlate with prognosis. Currently, the measurement of multiple biomarkers is not included in patient evaluation because it has high costs,  requires centralized laboratories, experienced personnel and bulky equipment and is time-consuming.

Thematic areas
Health & Biotech / Bio-medicals
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Biosensors
# Record card
84
Description

This technology is an e-health application. The DragONE application is inspired by the global guidelines for the management of asthma, which promote the opportunity to implement a multidimensional assessment of pediatric asthma using innovative systems. DragONE allows to record data on the subjective control of asthma, by using easy-to-understand colors and icons for children (red, yellow or green dragon), to keep track to the patient’s of perceived state.

Thematic areas
Health & Biotech / Bio-medicals
Health & Biotech / Smart Devices for Health and Wellness
# Record card
150
Description

The virtual dynamic docking, carried out in the MOLBD3 lab of the Institute of Biophysics, allows the identification of new drugs through the structural information deriving from the study of target proteins, responsible for some human pathologies. In particular, we screen drugs or small molecules (commercial/own libraries) against known protein sites, surface cavities, surfaces of protein-protein interactions (fixed/rigid hotspots) or structural transition states (dynamic hotspots).

Thematic areas
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Bio-medicals
Health & Biotech / Bio-informatics
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
19
Description

We propose an optical technique for the fast check of the presence, on the exposed surfaces of persons and objects, of explosives and their precursors, or drugs, or in general materials which are not allowed in restricted environments: airports, courts, places of worship, etc. The technique yields bi-dimensional pictures, with exposure time of < 1 sec, reporting the target substances, and their locations and quantities. The technique already provided laboratory preliminary results, to be completed, and fully validated for sensitivity and selectivity.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
Chemicals & Physics / Imaging & image processing
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Chemicals & Physics / Atomic and molecular spectroscopy
# Record card
57
Description

Inert biomedical devices with modular load-bearing function designed with peculiar multi-domain composite microstructures. The reference compositional system is Zirconia-Alumina with a prevailing overall composition of customizable zirconia or alumina. Examples of devices are 3D structures consisting of parts with differentiated functional properties, due to different composition/microstructure/architecture, and further functionalizable ex-post to favor and improve the stabilization of the implantation by newly formed bone in superior quantity and quality.

Thematic areas
Health & Biotech / Bio-medicals
Materials / Ceramic materials
Materials / Composite and hybrid materials
# Record card
55
Description

The constant demand for more powerful and energy-efficient electronic devices than existing ones is challenging scientists and companies to develop innovative solutions that can address such primary technological needs. Based on a recent scientific discovery made by our team we have developed a technology for superfast and extremely scalable logic and computing circuits with minimal energy losses, which has the potential to become the leading technology in the future world of largescale computing and telecommunication infrastructures.

Thematic areas
ICT & Electronics / Cybersecurity
ICT & Electronics / Network technology, network security
ICT & Electronics / Future Internet
ICT & Electronics / Big Data
ICT & Electronics / Artificial Intelligence
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / IT and Telematics applications
ICT & Electronics / Microwaves and RF
ICT & Electronics / Telecommunications
Aerospace and Earth Science / Satellite technologies
# Record card
181
Description

The proposed technology takes advantages of the huge potentialities of the gellan gum microgels in the preservation of cultural heritage. Microgels are polymeric gels particles with the micro and nanoscale size, whose soft nature is due to the presence of the aqueous solvent inside the particle. For their small size, they can easily diffuse in the environment and penetrate in the porous structure of paper and wood to act as cleaner agent.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Materials
Materials / Plastics, polymers
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
# Record card
151
Description

Combined use of High-Resolution Nuclear Magnetic Resonance (NMR) spectroscopy in solution and multivariate statistical analysis for the geographical differentiation of Italian and Chinese concentrated tomato paste. Particularly the metabolites content of acqueos exctrats of concentrated tomato paste is evaluated.

Thematic areas
Agrifood
Agrifood / Nutrition & health
Agrifood / Food quality & safety