Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 32

# Record card
239
Description

Bivalve mollusc shells are made mainly of CaCO3 (ca 95%), with a small fraction of organic material. If from these shells this mineral is retrieved, they could become a renewable and sustainable “mine” of a “blue” CaCO3. Bivalve mollusc shells, also after the removal of the animal flesh, maintain a certain quantity of organic substances, part in the muscle and part in the shell.

Thematic areas
Bioeconomy
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Health & Biotech
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Waste management
Additive and advanced industrial manufacturing
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Chemicals & Physics
Chemicals & Physics / Inorganic substances
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Materials
Materials / Ceramic materials
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Paper technology
Materials / Plastics, polymers
# Record card
83
Description

Aptamers, short structured single-stranded oligonucleotides binding at high affinity to a given target protein, are selected from large combinatorial libraries through repeated cycles of incubation of the library with the target, recovery and amplification of target-bound oligonucleotides (SELEX technology, Systematic Evolution of Ligands by EXponential enrichment). SELEX can be applied to select aptamers against a known target protein or against a specific cell phenotype, without any prior knowledge of the specific target, leading to new biomarkers discovery.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Diagnostic kits
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Development of new drugs
Health & Biotech / Biosensors
# Record card
171
Description

B-ME developed the first thermoplastic composite electrode film based on bio-derived and biodegradable polyesters and carbon nano-fibers. It is metal-free, highly electrically conductive and possess good thermo-mechanical properties, a challenging combination of three features in a single product. This is the first-of-its-kind product, as, to the best of our knowledge, no thermoplastic biobased electrode film has been effectively produced and used so far.

Thematic areas
ICT & Electronics
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Internet of Things
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Bioeconomy
Materials
Materials / Photo-active & graphene-based materials
Materials / Semiconductors and Superconductors
Materials / Composite and hybrid materials
Materials / Plastics, polymers
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Special chemicals
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Energy storage and transport
Energy and environmental sustainability / Energy production, transmission and conversion
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Wearable technologies
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
# Record card
89
Description

Nowadays, to properly design and develop advanced materials capable to preserve for long times their performance under aggressive environments such as power generation plants, renewables, nuclear reactors and electronics of new generation, transport on ground and on space, aeronautics, catalysis, biomedical implants, the optimization of metallurgical processes involved is crucial.

Thematic areas
Aerospace and Earth Science / Space sciences
Aerospace and Earth Science / Aeronautical technologies and avionics
Aerospace and Earth Science / Satellite technologies
Automotive transport and logistics / Vehicles
Automotive transport and logistics / Shipbuilding
Automotive transport and logistics / Propulsion
Automotive transport and logistics / Transport infrastructures
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Additive and advanced industrial manufacturing / Vacuum/High vacuum technologies
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Man made fibres
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Building materials
Materials / Ceramic materials
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Properties of materials, corrosion, degradation
Materials / Semiconductors and Superconductors
Energy and environmental sustainability / Renewable sources
Energy and environmental sustainability / Rational use of energy
Energy and environmental sustainability / Nuclear fission/nuclear fusion
Energy and environmental sustainability / Cleaner use of fossil fuels
Energy and environmental sustainability / Nuclear engineering
Energy and environmental sustainability / Safety and security
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Building materials
Health & Biotech / Bio-medicals
# Record card
27
Description

The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Bio-medicals
Health & Biotech / Diagnostic kits
ICT & Electronics / Big Data
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Health & Biotech / Biosensors
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
181
Description

The proposed technology takes advantages of the huge potentialities of the gellan gum microgels in the preservation of cultural heritage. Microgels are polymeric gels particles with the micro and nanoscale size, whose soft nature is due to the presence of the aqueous solvent inside the particle. For their small size, they can easily diffuse in the environment and penetrate in the porous structure of paper and wood to act as cleaner agent.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Materials
Materials / Plastics, polymers
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
# Record card
248
Description

The technology based on cell or tissue cultures is very useful for the production of bioactive compounds. These molecules, depending on the class they belong to, can be used in the food, pharmaceutical and cosmetic industry. In particular, the developed technology is addressed to the optimization of bioactive compounds in plant cell/tissue cultures having the biosynthetic pathway of the compound of interest.

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
# Record card
252
Description

Extracellular vesicles produced by teratocarcinoma cells were isolated and characterized. Functional assays on glioblastoma (GBM) cell cultures showed the inhibitory effect of these vesicles on tumor cell migration, without inducing undesirable effects such as increased cell proliferation or chemotherapy resistance.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
63
Description

Integrative omics has posed new challenges in modern precision medicine, particularly in oncology, including i) the identification of new tumor markers for early, precise, and non-invasive diagnostics, and ii) the discovery of innovative molecular targets for therapeutic applications. Our studies on medulloblastoma, a highly malignant childhood tumor, have contributed to identifying RNA molecules that meet these criteria.

Thematic areas
Health & Biotech / New therapies
# Record card
11
Description

Chemical solution deposition of metal-organic precursors have favoured the research and development of thin films of simple and complex oxides such as Pb(Zr,Ti)O3, and Al2O3, up to their industrial application in pyroelectric and capacitor devices. Deposition methods used are spin-on and dip-coating. The advantages of the techniques are:

(i) low cost of equipment and chemicals

(ii) large area deposition

(iii) low crystallisation temperatures

Thematic areas
Chemicals & Physics / Inorganic substances
Materials / Ceramic materials
Materials / Semiconductors and Superconductors
Materials / Glass
Materials / Optical materials
# Record card
74
Description

The object of the technology is the development of a transferable methodology from the laboratory scale to the pilot scale to be validated in the industrial setting for the treatment of basic waste of natural polymers of agro-food or manufacturing industry.

Thematic areas
Materials / Properties of materials, corrosion, degradation
Additive and advanced industrial manufacturing / Packaging
Energy and environmental sustainability / Renewable sources
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Subtainable substances and green chemistry
Energy and environmental sustainability / Waste management
Bioeconomy
# Record card
142
Description

The instrumentation is based on the electrical resistivity tomography (ERT) which is a non-invasive geophysical technology used to obtain information on anomalous bodies possibly present in the subsoil. The theoretical basis lies in the different electrical properties of the lithotypes present in the subsoil.

Thematic areas
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
# Record card
71
Description

Recently, nanoparticles and nanovesicles have been investigated as potential approaches for the treatment of neurodegenerative diseases. In particular, in the Biotech sector an increasingly deeper penetration of new treatment models and biological drugs based on cellular, subcellular and vesicle therapies is expected. The patent is based on the production of Myelin-based nanoVesicles (MyVes) produced by microfluidics, starting from myelin extracted from brain tissue. These vesicles find two major fields of applications as potential drugs or as supplements/nutraceuticals.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
Agrifood / Nutrition & health