Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 11 of 11

# Record card
45
Description

CNR-ISTEC develops geopolymer composites for thermostructural applications, such as: self-supporting cavities; thermal and acoustic insulation; thermal and fire barriers; high temperature coatings and damping; molds and cores for foundry; foams and refractory linings. Geopolymers are chemically bonded materials at T <300 ° C. Being inorganic polymers without water in the structure, they tolerate high temperatures: they are incombustible, do not emit gas or fumes and do not explode.

Thematic areas
Materials / Building materials
Materials / Ceramic materials
Materials / Composite and hybrid materials
Automotive transport and logistics / Vehicles
Automotive transport and logistics / Shipbuilding
Automotive transport and logistics / Propulsion
Aerospace and Earth Science / Aeronautical technologies and avionics
# Record card
62
Description

We propose a portable chemical analysis system capable of identifying chemical substances at trace concentrations (sub-ppm), even in case of a complex matrix of interfering species.

Thematic areas
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Smart cities and Communities
ICT & Electronics / Robotics and control systems
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
Additive and advanced industrial manufacturing / Process control and logistic
Chemicals & Physics / Separation technologies
Additive and advanced industrial manufacturing / Factory of the Future
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Energy and environmental sustainability / Safety and security
Health & Biotech / Medical Device
Energy and environmental sustainability / Natural disasters
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Energy and environmental sustainability / Sensory
Measurement tools and Standards
ICT & Electronics / Electronics and microelectronics
# Record card
144
Description

WembraneX is an Italian start-up born with the ambition to make a significant contribution to UN Sustainable Goal 6 - Ensure Access to Clean Water and Sanitation for all by 2030.

Thematic areas
Energy and environmental sustainability
Energy and environmental sustainability / Environmental engineering/technologies
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Chemicals & Physics
Chemicals & Physics / Separation technologies
Agrifood
Agrifood / Agriculture
Agrifood / Food quality & safety
# Record card
182
Description

An innovative approach for the treatment of diabetic and venous ulcers, characterized by a difficult healing process and therefore at potential risk of infection and therefore of hospitalization and amputation of the limb, is represented by the local administration of "bioactive" factors through the use of synthetic and/or biological matrices that allow a gradual and controlled release in order to obtain a better and faster healing.

Thematic areas
Health & Biotech
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Medical Device
Health & Biotech / Regenerative Medicine
# Record card
71
Description

Recently, nanoparticles and nanovesicles have been investigated as potential approaches for the treatment of neurodegenerative diseases. In particular, in the Biotech sector an increasingly deeper penetration of new treatment models and biological drugs based on cellular, subcellular and vesicle therapies is expected. The patent is based on the production of Myelin-based nanoVesicles (MyVes) produced by microfluidics, starting from myelin extracted from brain tissue. These vesicles find two major fields of applications as potential drugs or as supplements/nutraceuticals.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
Agrifood / Nutrition & health
# Record card
9
Description

Optical backplane for interconnection between boards of a high-capacity ICT apparatus, data-center, server and the related automatic assembly method. The solution is based on optical connections between boards with an optimized layout on a support with mechanical constraints that involve controlled deformations of commercial optical fibers with standardized connectors. The entire interconnection circuit is divided into N independent circuits, each of which makes the connections between all the boards (Full-Mesh).

Thematic areas
ICT & Electronics / Information processing, information system, workflow management
ICT & Electronics / Telecommunications
# Record card
140
Description

The technology refers to an innovative plasma (ionized gas) source operating at atmospheric pressure and low electric power levels. A cold plasma is produced, characterized by an ion temperature significantly lower than the electron temperature. Partial ionization of a Helium flux is induced by a time-varying electric field in between two parallel grids, both perpendicular to the flux itself.

Thematic areas
Health & Biotech
Health & Biotech / Bio-medicals
Health & Biotech / Care, Hygiene, Cosmetics
Health & Biotech / New therapies
Health & Biotech / Medical Device
Chemicals & Physics
Chemicals & Physics / Cold Plasmas
# Record card
139
Description

The study of proteins is typically limited to notions, sometimes with the aid of virtual 3D models, obtained from visualization programs. A knowledge of this type, although useful, limits the ability to acquire a more direct knowledge, almost never leads to awareness of dimensions, and is particularly difficult for those who do not have a strong capacity for three-dimensional imagination.

Thematic areas
Health & Biotech
Health & Biotech / Bio-informatics
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
Tourism, social sciences and cultural heritage / Education & learning
Tourism, social sciences and cultural heritage / Entertainment
Tourism, social sciences and cultural heritage / Socio-economic models
Tourism, social sciences and cultural heritage / Multimedia technologies
# Record card
141
Description

Thematic areas
Energy and environmental sustainability
Tourism, social sciences and cultural heritage / Safety and security
Energy and environmental sustainability / Sensory
Measurement tools and Standards
Tourism, social sciences and cultural heritage
Tourism, social sciences and cultural heritage / Archaeology
Energy and environmental sustainability / Safety and security
# Record card
99
Description

This form describes a programmable, autonomous and stand-alone imaging system for the acquisition and processing of images containing subjects whose size is larger than 1cm (e.g. gelatinous zooplankton, fishes, litter, manufacts), form the seafloor or along the water column, in shallow or deep waters. It is capable to recognize and classify the image content through pattern recognition algorithms that combine computer vision and artificial intelligence methodologies.

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Internet of Things
ICT & Electronics / Artificial Intelligence
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Information processing, information system, workflow management
Aerospace and Earth Science / Oceanography
Agrifood / Marine resources
Tourism, social sciences and cultural heritage / Technologies for preservation of cultural heritage
Tourism, social sciences and cultural heritage / Education & learning
Tourism, social sciences and cultural heritage / Entertainment
Tourism, social sciences and cultural heritage / Socio-economic models
Tourism, social sciences and cultural heritage / Multimedia technologies
# Record card
93
Description

Safe, efficient and specific nano-delivery systems are increasingly needed for precision and regenerative medicine and targeted therapies (e.g. anticancer and antimicrobial therapies), as well as for  the cosmetic and nutraceutical sectors’ applications. Despite the appreciable success of synthetic nanovectors, like for example liposomes, their clinical and market application is hampered by some limitations: • large scale production, • low cost production • intrinsic toxicity • limited cellular uptake • limited consumer acceptance.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
Materials / Processes of production & treatment of materials
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Agrifood / Marine resources
Agrifood / Nutrition & health
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
Chemicals & Physics / Subtainable substances and green chemistry
Health & Biotech / Regenerative Medicine