Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 16

# Record card
239
Description

Bivalve mollusc shells are made mainly of CaCO3 (ca 95%), with a small fraction of organic material. If from these shells this mineral is retrieved, they could become a renewable and sustainable “mine” of a “blue” CaCO3. Bivalve mollusc shells, also after the removal of the animal flesh, maintain a certain quantity of organic substances, part in the muscle and part in the shell.

Thematic areas
Bioeconomy
Energy and environmental sustainability
Energy and environmental sustainability / Renewable sources
Health & Biotech
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Waste management
Additive and advanced industrial manufacturing
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Chemicals & Physics
Chemicals & Physics / Inorganic substances
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Materials
Materials / Ceramic materials
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Paper technology
Materials / Plastics, polymers
# Record card
27
Description

The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.

Thematic areas
Health & Biotech / Micro and nanotechnology related to biological sciences
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Bio-medicals
Health & Biotech / Diagnostic kits
ICT & Electronics / Big Data
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Medical Device
Health & Biotech / Biosensors
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
250
Description

22q11.2DS(DGS) deletion syndrome is a rare and phenotypically variable multiorgan syndrome, currently without any cure. Our aim is to develop a standardized approach to formulate pharmacological products useful for clinical trials direct to prevent some serious clinical manifestations of adolescence and adulthood, such as neuropsychiatric and musculoskeletal diseases, or to eliminate or improve cardiovascular defects during embryonic development.

Thematic areas
Health & Biotech
# Record card
16
Description

Detection devices for the presence of molecules of interest (analytes) enjoyed a renewed burst with the introduction of biological components (biosensors). Their high specificity is often used in various fields, from environmental monitoring and biomedicine to the protection and promotion of agri-food products. However, the high cost of production and the lack of compatibility with mass sampling (high-throughput) sometimes limit their use.

Thematic areas
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
Health & Biotech / Smart Devices for Health and Wellness
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Health & Biotech / Biosensors
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Micro and nanotechnology related to biological sciences
Energy and environmental sustainability / Sensory
Health & Biotech / Diagnostic kits
# Record card
160
Description

At IFN-CNR, in collaboration with Politecnico di Milano-Department of Physics, we have developed Raman microscopy approaches compatible with the study and characterization of biological and industrial samples. In detail, our facility houses a self-built spontaneous confocal Raman microscope with the following characteristics: two excitation lasers (660nm and 785nm), inverted microscope (Olympus IX-73) and Princeton spectrometer / CCD.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Imaging & image processing
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
# Record card
252
Description

Extracellular vesicles produced by teratocarcinoma cells were isolated and characterized. Functional assays on glioblastoma (GBM) cell cultures showed the inhibitory effect of these vesicles on tumor cell migration, without inducing undesirable effects such as increased cell proliferation or chemotherapy resistance.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
29
Description

The aim of the research group is the creation of 3D models (microorgan/ organoids) constructed using samples obtained from patients, both biopsy samples and samples collected with non-invasive techniques (exhaled breath condensate, induced sputum, blood samples).

Thematic areas
Health & Biotech / New therapies
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Medical Device
# Record card
15
Description

We have identified the presence of the poorly characterized precursor proNGF-A in human tissues, deposited its coding nucleotide sequence (GenBank MH358394) and demonstrated its neuroprotective and neurotrophic activity in vitro and in vivo. We inserted mutations into the native molecule, identified through computational analysis, which allow proNGF-A production by eukaryotic expression systems, through a method currently validated on a laboratory scale.

Thematic areas
Health & Biotech / Development of new drugs
# Record card
33
Description

Severe asthma or chronic obstructive pulmonary disease (COPD) are nowadays associated with a poor response to corticosteroids which led to the use of high-dose with consequent improved onset of side effects. The use of nanotechnologies can represent an innovative approach for the effective treatment of both asthma and COPD. The development of new nano-formulations involving the use of nanomaterials and specifically tailored to be inhaled offers numerous advantages over conventional inhaled dosage forms.

Thematic areas
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
24
Description

Combinations of several enzymes in a production chain are preferred to “first generation” enzymatic processes (where the "single reaction - single enzyme" principle was followed), for the synthesis of compounds with high added value starting from simple and cheap substrates. An important requirement for obtaining control in "cascade enzymatic reactions" is the ability to deliver from one biocatalyst to the next one the various intermediates, limiting as much as possible the diffusion of the latter in the solvent.

Thematic areas
Materials / Processes of production & treatment of materials
Agrifood / Agriculture
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
Health & Biotech / Care, Hygiene, Cosmetics
Energy and environmental sustainability / Pollution treatment (air, soil, water)
Health & Biotech / Micro and nanotechnology related to biological sciences
Chemicals & Physics / Agro chemicals
Chemicals & Physics / Inorganic substances
Chemicals & Physics / Organic substances
Chemicals & Physics / Special chemicals
Chemicals & Physics / Subtainable substances and green chemistry
Materials / Plastics, polymers
# Record card
174
Description

Plants can compete favorably with traditional expression systems (mammalian cells, yeasts or bacteria) to produce recombinant proteins/peptides of pharmaceutical/industrial/agrifood interest. This technology names “Plant Molecular Farming”. The CNR-IBBA research team offers the study of new strategies for the expression and optimization of recombinant proteins/peptides in plant-based systems (plant tissues, transgenic plants, plant cell culture). Our pipeline is based on the following modules:

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Regenerative Medicine
# Record card
76
Description

The platform allows acquisition of data from commercial and custom sensors. By now, the system has been embedded in a wearable wristband where elastomeric based strain gauge have been integrated to detect fine hand/wrist/arm movements. The platform integrates inertial sensors (accelerometers, gyroscopes) to acquire more details about the subject movements. A sensor-fusion algorithm enables advanced movement recognition (gesture, 3D orientation). A machine-learning algorithm is in development to increase the performance of the platform.

Thematic areas
Health & Biotech / Smart Devices for Health and Wellness
ICT & Electronics / Internet of Things
ICT & Electronics / Electronics and microelectronics
ICT & Electronics / Information processing, information system, workflow management
# Record card
260
Description
Thematic areas
Agrifood
Agrifood / Nutrition & health
Agrifood / Food quality & safety
Health & Biotech
Health & Biotech / Development of new drugs
Additive and advanced industrial manufacturing
Health & Biotech / Biosensors
Health & Biotech / Bio-medicals
Chemicals & Physics
Additive and advanced industrial manufacturing / Packaging
Chemicals & Physics / Agro chemicals
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Health & Biotech / Diagnostic kits
Chemicals & Physics / Colours & dyes
Chemicals & Physics / Plastics & rubber
Chemicals & Physics / Detergents & cleaning technologies