Technologies

A biosensor based on magnetic microspheres functionalized with a DNA-aptamer was developed for the specific biomonitoring of biological contaminants (mycotoxins) in urine.

Current standard SPECTs, in order to achieve high resolutions, use a multi-pinholes technology that requires numerous data processing to limit the effects of image distortion. The proposed SSR-SPECT scanner, uses a parallel-hole collimator and therefore does not require numerical reprocessing of the data to obtain correct information on the images, while assuring spatial resolutions close to those of the pinholes through the acquisition of sequences of images shifted from one to another.

Ageing characterization of Balsamic Vinegar of Modena (BVM) and Traditional Balsamic Vinegar of Modena (TBVM) by the combined use of Nuclear Magnetic Resonance spectroscopy (NMR) and multivariate statistical analysis. Our database allows to differentiate BVM from TBVM samples. Moreover, within BVMs, samples with ageing <3/>3 years can be discriminated and within TBVM, samples with ageing between 12 and 25 years as well as >25 years can be discriminated.

Direct quantification of the percentage of arabica in roasted and ground coffee blends of arabica/robusta by High Resolution Nuclear Magnetic Resonance spectroscopy (NMR), in solution and multivariate statistical analysis. Particularly, the metabolites content present in water extracts of coffee is analyzed and compared with NMR data of our database.

Aptamers, short structured single-stranded oligonucleotides binding at high affinity to a given target protein, are selected from large combinatorial libraries through repeated cycles of incubation of the library with the target, recovery and amplification of target-bound oligonucleotides (SELEX technology, Systematic Evolution of Ligands by EXponential enrichment). SELEX can be applied to select aptamers against a known target protein or against a specific cell phenotype, without any prior knowledge of the specific target, leading to new biomarkers discovery.

The proposed technology consists of a portable device for monitoring the freshness of fish, based on its smell. The device is based on a gas sensor and pattern recognition software to correlate the sensor signal to the freshness of the food. The technology is designed for its integration into domestic or industrial refrigerators.

Combined use of High-Resolution Nuclear Magnetic Resonance spectroscopy (NMR) and multivariate statistical analysis for the differentiation of PDO Parmigiano Reggiano samples according to ripening and for the differentiation of PDO Parmigiano Reggiano from “Grana type” products available on the market.

Time-correlated single photon counting (TCSPC) is regarded as the “gold-standard” method for fluorescence lifetime measurements. However, TCSPC requires using highly sensitive detectors, not suitable for measurements under bright light conditions, thereby making the use impractical in clinical settings. The invention described here solves this problem by synchronizing the fluorescence detection with an external light source.

The dramatic global health emergency due to the SARS-CoV-2 pandemic requires new diagnostic devices capable of identifying the presence of virus particles in patient biological samples. In this direction, the development of an innovative low-cost test, which provides the result within a few minutes, which is reproducible and which can reveal the direct presence of even a few viral particles, would be of fundamental importance for the monitoring and containment of the pandemic.

The final technology will add polarimetric capability to imaging cameras in the NUV/optical, providing simultaneous measurements of the different polarization states of the light. This will be obtained by the development of an innovative coating based on nanostructured emissive materials sensitive to the polarization of the incident light. A  double layer film of two organic systems will be coupled to image detectors so that the two polarization components of the incoming light are converted into two different colors.

The aim of the present invention is to develop a modular scintigraphic device, with high spatial resolution, capable of creating investigation areas of various shapes and sizes, of compact form and of being used in different types of applications.

The compact-GC platform is a MEMS-based analytical module for the purge&trap pre-concentration and (gas)-chromatographic separation of a sample. The two analytical MEMS (pre-concentrator and GC column) are interconnected by means of a MEMS microfluidic manifold. The microfluidic manifold interconnects the analytical MEMS, but it also acts as injector through the integrated micro-valves.

The containers for plants and the like have different shapes, an open top to facilitate irrigation and material supply; a base that includes one or more holes to facilitate proper water drainage and to ensure ventilation for the rooting apparatus. An inconvenience of these containers is related to their placement in outdoor environments without roofs: in the presence of "unfavorable" climatic conditions, excessive exposure to rain water rather than excessive exposure to the sun, these containers expose plants to a series of problems.

The present invention relates to a gamma camera for intracavitary use, which is widely used in the field of radio-guided surgery (intra-operative and laparoscopic and robotic-assisted) for the localisation of lymph nodes and tumours and/or other pathologies. The aim of the present invention is to make available an intraoperative tool able to overcome the drawbacks of the present known art.

The proposed technology is based on the micro-fabrication of electrodes in order to generate surface acoustic waves (SAW) with well-defined frequencies, on piezoelectric substrates. The operating principle of a surface acoustic wave sensor is linked to the variation of the characteristics of the acoustic wave that propagates on the device (e.g. wave velocity on the substrate, etc.) caused by the interaction with the environment (e.g. interaction of an analyte on the surface of the device, deformation of the substrate, etc.).