Technologies

In this section it is possible to view, also through targeted research, the technologies inserted in the PROMO-TT Database. For further information on the technologies and to contact the CNR Research Teams who developed them, it is necessary to contact the Project Manager (see the references at the bottom of each record card).

Displaying results 1 - 15 of 17

# Record card
161
Description

AIDD is an integrated tool and a radically new way to discovery new drugs for neurodegenerative diseases (Alzheimer’s, Epilepsy, Ageing, etc.).

Thematic areas
Health & Biotech
Health & Biotech / Bio-informatics
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Development of new drugs
Energy and environmental sustainability
Energy and environmental sustainability / Simulation
# Record card
284
Description

This innovative technology involves the use of a high-affinity, highly specific antibody that targets extracellular domains of connexin hemichannels (Cx26, Cx30, and Cx32). The antibody has been designed to reduce or inhibit the growth of brain tumors, particularly glioblastoma (GBM), and to alleviate the associated epilepsy. By blocking connexin hemichannels, the antibody interferes with pathological ATP release and other signaling mechanisms that contribute to tumor progression and neural hyperexcitability.

Thematic areas
Health & Biotech
Health & Biotech / New therapies
Health & Biotech / Development of new drugs
# Record card
95
Description

The proposed technology is based on the micro-fabrication of electrodes in order to generate surface acoustic waves (SAW) with well-defined frequencies, on piezoelectric substrates. The operating principle of a surface acoustic wave sensor is linked to the variation of the characteristics of the acoustic wave that propagates on the device (e.g. wave velocity on the substrate, etc.) caused by the interaction with the environment (e.g. interaction of an analyte on the surface of the device, deformation of the substrate, etc.).

Thematic areas
Agrifood / Food quality & safety
Aerospace and Earth Science
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
Energy and environmental sustainability / Sensory
ICT & Electronics / Sensor/multi-sensor technology, instrumentation
ICT & Electronics / Electronics and microelectronics
Health & Biotech / Smart Devices for Health and Wellness
Health & Biotech / Biosensors
Tourism, social sciences and cultural heritage / Safety and security
# Record card
52
Description

Silicon nanowires (SiNWs) are 1D structures with diameter ranging from few tens to hundreds of nanometers and length varying from few tens of nanometers to millimiters. SiNWs are fabricated in the labs of the IMM-CNR, Rome Unit,  by using bottom-up technologies such as plasma enhanced chemical vapor deposition (PECVD) at low growth temperature ((≤350°C), allowing the use of plastic and glassy substrates. Their electrical properties can be tuned by controlling the p/n doping during the growth.

Thematic areas
Health & Biotech / Nanomedicine
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Medical imaging & equipment
Health & Biotech / Smart Devices for Health and Wellness
Materials / Composite and hybrid materials
Materials / Metals & alloys
Materials / Optical materials
Materials / Processes of production & treatment of materials
Materials / Semiconductors and Superconductors
Chemicals & Physics / Micro and nanotechnology related to physical, chemical and exact sciences
ICT & Electronics / Optics & Acoustic
ICT & Electronics / Optoacustic sensors, Optoelectronic devices
ICT & Electronics / Nanotechnologies related to electronics and microelectronics
ICT & Electronics / Electronics and microelectronics
Energy and environmental sustainability / Sensory
# Record card
160
Description

At IFN-CNR, in collaboration with Politecnico di Milano-Department of Physics, we have developed Raman microscopy approaches compatible with the study and characterization of biological and industrial samples. In detail, our facility houses a self-built spontaneous confocal Raman microscope with the following characteristics: two excitation lasers (660nm and 785nm), inverted microscope (Olympus IX-73) and Princeton spectrometer / CCD.

Thematic areas
Chemicals & Physics
Chemicals & Physics / Imaging & image processing
Chemicals & Physics / Atomic and molecular spectroscopy
Health & Biotech
Health & Biotech / Diagnostic, Medical imaging & advanced bioimaging
Health & Biotech / Biosensors
# Record card
252
Description

Extracellular vesicles produced by teratocarcinoma cells were isolated and characterized. Functional assays on glioblastoma (GBM) cell cultures showed the inhibitory effect of these vesicles on tumor cell migration, without inducing undesirable effects such as increased cell proliferation or chemotherapy resistance.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
243
Description

This invention comprises an interrogation and readout differential method for chemical sensors based on Surface Plasmon Resonances (SPR). The integration of the SPR sensing unit (chip or other), as intermediate reflecting element of a Fabry-Perot (FP) optical resonator, is the starting point for the application of this method.

Thematic areas
ICT & Electronics
ICT & Electronics / Laser technologies
Tourism, social sciences and cultural heritage / Archeometry
Tourism, social sciences and cultural heritage / Safety and security
ICT & Electronics / Optics & Acoustic
Agrifood
Energy and environmental sustainability
Health & Biotech
Agrifood / Food quality & safety
Additive and advanced industrial manufacturing
Health & Biotech / Biosensors
Energy and environmental sustainability / Sensory
Additive and advanced industrial manufacturing / Factory of the Future
Measurement tools and Standards
Tourism, social sciences and cultural heritage
ICT & Electronics / Microwaves and RF
# Record card
20
Description

Therapeutic strategies targeting cell cycle in cancer have in general failed in the clinic since the drugs have lacked the therapeutic index required to achieve a robust response against cancer cells with little or no cytotoxic effect on normal cells. NEK6 kinase, which is implicated in cell cycle control, has recently emerged as an attractive target for the development of novel anticancer drugs with enhanced therapeutic index.

Thematic areas
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Development of new drugs
# Record card
35
Description

We have identified compounds that show a neuroprotective action in vivo, in models of neurodegenerative diseases (e.g. SMA, Parkinson, Alzheimer, Huntington) in the model organism C. elegans. These compounds consist of: mixtures of 22 natural extracts, 15 natural molecules and 11 synthetic molecules.

Thematic areas
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
Health & Biotech / Care, Hygiene, Cosmetics
# Record card
137
Description

With the advent of senolytic agents, capable of selectively removing senescent cells in “aged” tissues, the perception of age-associated diseases has changed from being an inevitable to a preventable phenomenon of human life. The present invention is part of this research topic with the identification of molecules with potential pro-apoptotic activity, specifically with senolytic activity. The computational approach adopted, is based on combining ligand-base and structure-based virtual screening.

Thematic areas
Health & Biotech
Health & Biotech / Micro and nanotechnology related to biological sciences
Health & Biotech / Bio-medicals
Health & Biotech / New therapies
Health & Biotech / Nanomedicine
Health & Biotech / Development of new drugs
# Record card
295
Description

Our proposal focuses on innovative formulations containing metallic complexes and plant extracts for diabetes treatment. The formulations were tested in vitro on human adipocyte cell models, showing a strong hypoglycemic effect due to the synergistic action of the two components. The plant extracts, derived from waste biomass of the agri-food industry, possess high antioxidant activity and interesting nutraceutical properties, due to their composition rich in polyphenols.

Thematic areas
Agrifood / Nutrition & health
Health & Biotech / Development of new drugs
# Record card
174
Description

Plants can compete favorably with traditional expression systems (mammalian cells, yeasts or bacteria) to produce recombinant proteins/peptides of pharmaceutical/industrial/agrifood interest. This technology names “Plant Molecular Farming”. The CNR-IBBA research team offers the study of new strategies for the expression and optimization of recombinant proteins/peptides in plant-based systems (plant tissues, transgenic plants, plant cell culture). Our pipeline is based on the following modules:

Thematic areas
Agrifood
Agrifood / Nutrition & health
Health & Biotech
Health & Biotech / Development of new drugs
Health & Biotech / Regenerative Medicine
# Record card
155
Description

The development of an innovative screening platform of natural marine extracts guided by biological assays represents one of the main products developed within the Antitumor Drugs and Vaccines from the SEA (ADViSE) project which aims to provide a new vision in Drug Discovery processes.

Thematic areas
Health & Biotech
Health & Biotech / New therapies
Health & Biotech / Development of new drugs
Chemicals & Physics
Chemicals & Physics / Organic substances
Chemicals & Physics / Separation technologies
# Record card
8
Description

Polymer development is approaching to a new stage of advancement in which new functionalities especially in combination with conductive polymers and nanomaterials are more effective. In this context the study of new composites is the key to enable the development of disruptive technologies as additive manufacturing. Increasing electrical conductivity open the way to a new class of objects to be prototyped rapidly at low cost with a high level of customization.

Thematic areas
ICT & Electronics / Laser technologies
Bioeconomy
Materials / Photo-active & graphene-based materials
Additive and advanced industrial manufacturing / Additive manufacturing processes and materials
Additive and advanced industrial manufacturing / Factory of the Future
Health & Biotech / Biosensors